Latest News

404 Error: Not Found

Sorry, but the page you are trying to reach is unavailable or does not exist.

You may interested with this

  • Steelmaking to Rise by Three Percent In 2013

    Steel is an amalgamation which is prepared by the process of alloying that merges iron and small percentage of other elements. The most used among elements is carbon. With the growing demand of steel, there are rising trends of steel consumption globally. Australia’s Bureau of Resources and Energy Economics suggests steel consumption & production trends […]

  • Abrasive Wear

    What is Abrasive Wear: Abrasive wear is defined as the wearing off or detachment of residuals from a surface as a result of being interactive to passing by fluids, gases, or with the rubbing of a solid. In solids, Abrasive wear results when a rigid irregular surface rubs on a less hard surface. American Society […]

  • ISO 3574 Deep Drawing Quality Cold Rolled CR3 Steel

    What are CR3 Steels? CR3 steels are deep drawing quality mild steel implied in ISO 3574 and is classified equivalent to SPCE steels in JIS standard. CR3 Steels are applicable for deep drawing processes that are applicable for minimal extend. Deep drawing processes are those where depth of drawn part is more as compare to […]

  • Cold Rolled Steel Coils Cold Rolled Steel – Improved Surface Finishes & Tighter Tolerances

    Definition: Cold Rolled Steel is defined as the group of steels which has been passed through a rolling mill below its recrystallization temperature. The recrystallization temperature of steel is from four hundred centigrade to seven hundred centigrade. Recrystallization of steel is a microstructural phenomenon which is achieved by heating on the other hand distorted grains […]

  • ISO 3575 Galvanized Extra Deep Drawing Cold Rolled Stabilized 05 Steel

    What is Extra Deep Drawing Quality Stabilized 05 Steel? It is the material specification for hot dip galvanized cold rolled Stabilized extra deep drawing quality steels in the international standard ISO 3575. The extra deep drawing steel is more durable than 04 drawing galvanizing steel. The difference between 04 & 05 steels is that 05 […]

  • Chromium Cr Chromium Chemical Symbol “Cr’’ Atomic Number 24

    Chromium element belongs to the chemical elements belonging to group 6 i.e. transition metals. Molybdenum, Seaborgium, Tungsten are other members of group VI of the periodic table. The periodic table is known because of its arrangement of groups and periods. It also helps in discriminating elements with each other. Occurrence of Chromium: In the earth’s […]

  • Alloy 6061 – Aluminum Based Precipitation hardened

    What is Aluminum Alloy 6061? Grade Alloy 6061 is the aluminum alloy having silicon and magnesium as main alloying elements. It is a precipitation hardened aluminum alloy. Alloy 6061 is referred as the most general and common alloy within aluminum grade alloys. It has robust mechanical properties and also has good weldability. This alloy is […]

  • Atomic No and Symbol Antimony Chemical Symbol “Sb” Atomic Number 51

    Antimony belongs to the chemical elements belonging to Group 15 i.e. Pnictogens family. Phosphorus, Bismuth, Nitrogen and arsenic are other members of group XV of the periodic table. Occurrence of Antimony: Antimony exists in the Earth’s crust in parts 0.2 and 0.5 per million. Antimony is not very common element but it is found in […]

Tags Cloud


Search Here